Miele KM 404 User Manual download pdf (Page 14)

The cooktop should have been ordered

for connection to either natural gas or

LP gas.

The included regulator corresponds

with the gas type of the cooktop. Verify

before installing. See, "To convert the

regulator".

If the appliance is to be connected to a

type of gas other than it was originally

configured for, both the regulator and

burners must be converted.

,

WARNING

The conversion kit must be

installed by a qualified technician

in accordance with the

manufacturer’s instructions and

all applicable local and national

codes. If the information in these

instructions is not followed

exactly, a fire, explosion or

production of carbon monoxide

may result causing property

damage, personal injury or loss of

life. The qualified technician is

responsible for the proper

installation of this kit. The

installation is not proper and

complete until the operation of the

converted appliance is checked as

specified in these instructions.

To convert the regulator

^

Unscrew the hexagonal nut (silver

cap) located on the top of the

regulator.

^

Make sure that the spring stays in

place.

^

Flip over the cap and screw it back in

place.

A stamp should be visible on top of the

cap or at the bottom of the center hole

when converted ("LP" for LPG and "NG"

for Natural gas).

Converting KM 360

14

1 ... 13 14 15 ... 52

Comments to this Manuals

No comments