Miele DG 4064 Operations Instructions download pdf (Page 56)

Connection should be made via a

suitable isolator which complies with

national and local safety regulations,

and the On/Off switch should be easily

accessible after the appliance has

been built in.

If the switch is not accessible after

installation (depending on country) an

additional means of disconnection must

be provided for all poles.

For extra safety it is advisable to install

a suitable residual current device

(RCD).

When switched off there must be an

all-pole contact gap of at least 3 mm in

the isolator switch (including switch,

fuses and relays).

Important U.K.

This appliance is supplied for

connection to a single phase 230-240 V

50 Hz supply with a 3-core cable.

The wires in the mains lead are

coloured in accordance with the

following code:

Green/yellow = earth

Blue = neutral

Brown = live

In other countries check these details

with your supplier.

WARNING

THIS APPLIANCE MUST BE

EARTHED

Important

The electrical safety of this appliance

can only be guaranteed when

continuity is complete between the

appliance and an effective earthing

system, which complies with local and

national regulations. It is most important

that this basic safety requirement is

regularly tested and if there is any

doubt, the electrical wiring in the home

should be inspected by a qualified

electrician. The manufacturer cannot be

held liable for the consequences of an

inadequate earthing system such as an

electric shock.

The manufacturer cannot be held

liable for damage which is the direct

or indirect result of incorrect

installation or connection.

Services

56

1 ... 55 56 57 58 59 60

Comments to this Manuals

No comments