Miele KFN 9755 iDE EN User Manual download pdf (Page 10)

Before using for the first time

If the appliance was transported or

laid horizontally for any reason, allow

it to stand vertical for at least 8 hours

before turning it on. Failure to do so

will affect the functioning of the

appliance.

Protective foil

The stainless steel trim, frames and

panels have a layer of protective foil to

prevent scratching during

transportation.

^ Carefully remove the protective foil.

Cleaning and care

^ After removing the protective foil,

treat stainless steel surfaces with the

Miele stainless steel conditioning

agent supplied with the appliance

(available to re-order from

www.mieleusa.com).

Important! Each time it is used, the

Miele stainless steel conditioning

agent forms a water and dirt

repellent protective coating.

^

Clean the inside of the appliance and

the accessories with a mild solution

of warm water and liquid dish soap,

and then dry with a soft cloth.

Turning the appliance on

With the main switch you can turn the

appliance on.

^

Press the main switch on the right

side of the control panel.

The temperature display for the

refrigerator section lights up, and the

interior lighting comes on when the

door is opened.

Bars light up in the freezer section

display until the selected temperature is

reached.

The appliance begins cooling.

Allow the appliance to run for a few

hours before placing food in it. This will

enable it to sufficiently cool.

Cool pack

Place the cool pack in the top freezer

drawer. The cool pack will be at

maximum performance after it has been

in the freezer for approx. 24 hours.

Turning the appliance off

^

Press the main switch on the right

side of the appliance until both

temperature displays go out.

If the cooling system does not turn off

the safety lock has been activated.

Before use

10

1 ... 9 10 11 ... 60

Comments to this Manuals

No comments