Miele KFN 9755 iDE EN User Manual download pdf (Page 29)

^

Clean the condensate channel and

drain hole frequently, so that

condensate can drain away

unhindered. Use a straw or similar to

clear the drain if necessary.

^

After cleaning, wipe the interior and

accessories with a damp cloth and

dry with a soft cloth. Leave the door

open to air the appliance for a short

while.

^

Use the Miele stainless steel

conditioning agent to remove any

soiling from stainless steel surfaces.

^ It is important to treat the stainless

steel trim, frames and panels with

Miele stainless steel conditioning

agent each time they are cleaned.

This will protect the surface and help

prevent resoiling.

Cleaning the ice cube tray

The ice cubes are formed in a tray

before they are dropped into the

drawer.

The tray should be cleaned regularly to

remove any stale ice or water.

^

Connect the appliance to the

electrical supply.

^

Press the On/Off button for the ice

cube maker, the indicator light will

turn on.

^

Empty the ice cube drawer.

^

Press the On/Off button for the ice

cube maker for approx. 10 seconds

(after approx. 1 second the ice maker

will turn off and the indicator light will

go out).

The indicator light will flash.

^

Push the ice cube drawer in as far as

it will go within the next 60 seconds.

The ice cube tray will then rotate into an

angled position for easier cleaning.

Wait until the ice cube tray has

completed this rotation before

continuing.

^

Remove the ice cube drawer.

^

Clean the ice cube drawer and tray

with a mild solution of warm water

and liquid dish soap.

^ Press the On/Off button on the ice

cube maker.

The ice cube tray rotates back into its

original position.

^

Replace the ice cube drawer and

close.

The ice cube maker will begin

producing ice cubes again after a

maximum of 6 hours.

If the ice cube maker has not been

used for an extended period of time,

it is important to clean the ice cube

tray before using it again.

Cleaning and Care

29

1 ... 28 29 30 ... 60

Comments to this Manuals

No comments