Miele T 7644 C Operations Instructions download pdf (Page 11)

Danger.

This tumble dryer must not be connected to a controllable socket

(e.g. a timer switch or a peak load shut-off device).

If the dryer programme were to be interrupted before the end of the

cooling down phase, the laundry could self-combust.

To prevent the risk of fire, the following must not be tumble dried:

–

items which have been cleaned using chemicals (e.g.

professional dry-cleaning agents).

–

fabrics which contain a large proportion of rubber, foam rubber or

rubber-like materials. For example, products made from latex

foam rubber, shower caps, waterproof textiles, rubberised articles

and items of clothing and pillows with foam rubber filling.

– damaged items which contain padding or fillings (e.g. pillows,

jackets). When damaged, the filling can get out with the risk of

igniting in the dryer.

In many programmes, the heating phase is followed by a cooling

down phase to ensure that the items are not too hot to handle when

you remove them (this also avoids the danger of the laundry

self-igniting). The programme is not finished until the cooling down

phase has been completed.

As soon as the programme has finished, remove all laundry from the

drum.

Fabric conditioner and similar products must be used according

to the instructions on the manufacturer's packaging.

Do not let anyone sit or lean on the door, as this can cause the

tumble dryer to tip up.

Always close the door after use. This way you will avoid the

danger of:

–

children climbing into the dryer or hiding things in it.

–

pets or other small animals climbing into it.

Warning and Safety instructions

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 63 64

No comments

Miele T 7644 C Operations Instructions Page 11