Miele T 8826 WP Operations Instructions download pdf (Page 39)

Cleaning the cooling fins

(bottom right grille)

,

In general, the cooling fins do

not need cleaning. They should only

be cleaned if the drying process is

taking an exceptionally long time

due to a very high level of dust or

fluff in the room in which the dryer is

installed.

Use the yellow lever supplied to open

the bottom right grille.

^

Insert the lever in the middle of the

gap at the top and lift it up gently

(see arrow) until the grille opens out

at the top.

^

Now remove the grille by pulling it

diagonally upwards.

^

Check whether the cooling fins are

clogged.

,

Danger of injury.

Do not touch the cooling fins with

your hand. You could cut yourself.

,

To prevent damaging the

cooling fins, only pass the vacuum

cleaner brush over them lightly,

without applying any pressure.

^ Vacuum up any soiling carefully

using a vacuum cleaner dusting

brush or small crevice nozzle.

^

To replace the grille, first insert the

bottom of the grille (as shown).

^

Then push the grille firmly into

position at the top.

Problem solving guide

39

1 ... 38 39 40 ... 64

Comments to this Manuals

No comments