Miele T 8826 WP Operations Instructions download pdf (Page 8)

Technical safety

Before setting up the tumble dryer, check it for any externally

visible damage.

Do not install or use a damaged tumble dryer.

Before connecting the tumble dryer, ensure that the connection

data on the data plate (voltage and frequency) match the mains

electricity supply. If in any doubt, consult a qualified electrician.

The electrical safety of this tumble dryer can only be guaranteed

when correctly earthed. It is most important that this basic safety

requirement is observed and regularly tested, and where there is

any doubt, the household wiring system should be inspected by a

qualified electrician. Miele cannot be held liable for the

consequences of an inadequate earthing system (e.g. electric

shock).

Do not connect the tumble dryer to the mains electricity supply by

an extension lead. Extension leads do not guarantee the required

safety of the tumble dryer (e.g. danger of overheating).

If the electrical connection cable is faulty it must only be replaced

by a Miele approved service technician to protect the user from

danger.

Unauthorised repairs could result in unforeseen dangers for the

user, for which Miele cannot accept liability. Repairs should only be

undertaken by a Miele approved service technician, otherwise any

subsequent damage will not be covered by the guarantee. Ensure

current is not supplied to the tumble dryer until after maintenance or

repair work has been carried out.

Faulty components must only be replaced by genuine Miele

original spare parts. Only when these parts are fitted can the safety

standards of the tumble dryer be guaranteed.

Warning and Safety instructions

1 2 3 4 5 6 7 8 9 ... 64

No comments

Miele T 8826 WP Operations Instructions Page 8