Miele K 3402 S ed User Manual download pdf (Page 4)

105615-2-CA (A)

4 Kohler Co., Kohler, WI

4. INSTALLATION

INSTALL TOILET GASKET

Place new toilet onto padding with the side opposite the

trip lever down.

Firmly place gasket on toilet outlet. If using a gasket with

integral plastic sleeve, position gasket with sleeve facing

away from toilet.

If desired, place a 1/4”-thick bead of toilet setting com-

pound around base.

NOTE: If a rag or other plug was placed in closet flange,

remove rag from closet flange before setting toilet.

Fig. #6

Gasket

ALIGN AND SET TOILET

Carefully align and lower toilet over the closet flange and

T-bolts.

CAUTION: Risk of external leakage. Do not lift or

rock toilet after placement. A new gasket must be

reapplied if you break the watertight seal.

Apply full body weight to toilet rim to set seal.

Fig. #7

SECURE TOILET

Assemble bolt cap bases, washers, and nuts on exposed

T-bolts. Hand-tighten nuts, then tighten an additional

1/2-turn with wrench.

CAUTION: Risk of personal injury or product

damage. Over-tightening may cause breakage or

chipping.

If T-bolts extend more than 1/4” from top of nut, cut off

excess with a hacksaw and file cut edges. Wipe away any

residue.

Install bolt caps.

Fig. #8

Bolt Cap

Nut

Washer

Bolt Cap Base

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Miele K 3402 S ed User Manual Page 4