Miele G 7827 User Manual download pdf (Page 15)

The lift door can only be opened when:

–

the lab glassware washer is

connected to the electrical supply,

–

the red ("emergency cut off") switch

is in the I-ON position,

–

the I-0 On-Off button is pressed in,

and

–

no program is running.

The lift door on the clean side (G 7828)

can only be opened when:

– DESIN (disinfection) programs have

been correctly completed,

or

– the Door interlock has been

activated, i.e. DOOR MECH. has

been set to one of the following

parameters:

- INTERLOCK,

- DOOR CLEAN+INTERLOCK,

- DOOR UNCL.+INT.LOCK.

(see "Machine function - Door

mechanism..." in the Programming

manual).

To open the lift door

^

Press the 5 door button. The lift door

rises.

,

Do not touch the heating

elements (under the wide area filter)

during or directly after the end of a

program, you could burn yourself.

If the boiler has been programmed

to "BOILER READY", be particularly

careful of hot water and steam when

opening the door. Danger of burning

or scalding. The water inlet pipe to

the wash cabinet is located, as

viewed from the unclean side,

underneath the basket runner on the

left hand side.

To close the lift door

^ Press the 5 door button. The lift door

lowers.

Opening and closing the lift door

15

1 ... 14 15 16 ... 48

Comments to this Manuals

No comments