Miele HG02 User Manual download pdf (Page 21)

Place a template on each end of the

mounting bracket as shown, making

sure the rule marks face the outside

of the bracket.

Hang the mounting bracket on the

machine door.

Slide the top edge of the templates

under the filler strips and control

panel.

Slide the bracket up or down until the

oblong holes on the machine door

line up with the oblong holes on the

template (shown in inset a).

^ Draw a line on each template that is

even with the top edge of the adja-

cent cabinet door (inset b).

^ Remove the bracket from the door.

^ Place the door panel on a flat sur-

face, good side facing down, taking

care not to scratch the surface. Make

certain that the bottom of the panel is

closest to you.

Place the bracket on the back of the

door panel and adjust it so that:

–

the lines drawn on the templates

align with the upper edge of the door

panel.

–

the mounting bracket is centered (left

to right) on the door panel.

Installation

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 39 40

No comments

Miele HG02 User Manual Page 21