Miele DA 5000 D Service Manual download pdf (Page 20)

Changing a halogen lamp

To change the lamps, the canopy

needs to be open.

^

Touch the s sensor.

The fan will start running at power level

2, and the canopy will open.

^

Touch the "2" sensor for approx. 5

seconds, until the fan switches off.

The canopy will remain open.

^

Before any cleaning or maintenance

work, disconnect the cooker hood

from the mains supply. Ensure that:

– it is switched off at the isolator, or

– the screw-out fuse is removed (in

countries where this is applicable), or

– the fuse from the fused spur

connection unit is withdrawn, or

– it is switched off at the mains fuse

box.

^ Remove the grease filters.

,

Exercise caution when changing

halogen lamps. They get very hot

during use, and remain hot for some

time after being switched off: danger

of burning.

Wait until the lamps have cooled

down before changing them.

^ Press the lighting unit down slightly

through the hole above the lamp, as

shown.

^ Turn the halogen lamp anti-clockwise

out of its socket.

^ Replace it with a new halogen lamp

(specification: GU/GZ 10, 230 V,

50 W). Screw the lamp into the

socket and push it upwards.

We recommend only using lamps of the

same specification and also made by

the same manufacturer as the ones

being replaced.

^

Replace the grease filters.

^

Reconnect the cooker hood to the

mains supply.

The canopy will close.

Cleaning and care

20

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 31 32

Comments to this Manuals

No comments