Miele DA 5000 D Service Manual download pdf (Page 13)

To switch the fan on s

^

Touch the s sensor.

The fan runs at power level 2.

The s and "2" sensors light up. The

canopy will open.

If the cooker hood has been

connected to a window contact

switch via the Miele DSM 400 control

module, then the fan cannot be

switched on if the window is shut.

The s sensor will flash.

To select a power level

Depending on the intensity of the

cooking vapours, levels 1 to 3 are

usually sufficient for normal cooking.

^

Select the level you require by

touching the "1", "2" or "3" sensors.

Intensive setting

^

For short periods of cooking food

with intensive vapours and a strong

aroma, e.g. when searing meat, you

may wish to select level 4, the

Intensive Setting.

Automatic switch-off of the Intensive

setting

You can set the Intensive setting so that

it always only runs for 10 minutes

before reverting automatically to level 3.

^

To set this option, both the fan and

the hob lighting must be switched off.

^

Touch the "5m15" sensor for approx.

10 seconds until the "1" sensor lights

up.

^

Touch in turn

– the n sensor,

– the "1" sensor and

– the n sensor again.

The sensors for fan power levels 1 and

4 will flash if the automatic switch-off for

the Intensive setting is not activated.

^ Touch the "4" sensor to activate auto-

matic switch-off.

The "1" and "4" sensors will now light

up constantly.

Touch the "1" sensor to deactivate the

automatic switch-off function.

^

Touch the "5m15" sensor to confirm

your selection.

If you do not confirm your selection

within 4 minutes, the cooker hood will

automatically revert to the original

setting.

Operation

13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

Comments to this Manuals

No comments