Miele DA 5000 D Service Manual download pdf (Page 15)

Feature lighting

The feature lighting can be switched on

and off by touching the sensor.

Safety cut-out

Should the cooker hood be left on, the

fan will switch off automatically after 10

hours. The lighting will remain on.

^

Touching the s sensor will switch the

fan back on again.

Operating hours counter l

The number of hours the appliance has

been in operation is stored in memory.

The operating hours counter tells you

when the grease filters need to be

cleaned.

After 30 hours of operation (or another

time if the operating hours counter has

been altered), the l sensor will light

up. The grease filters must then be

cleaned.

Afterwards, the operating hours counter

will need to be reset (see "Cleaning and

care").

Reading the grease filter operating

hours counter

To check the percentage of time set

already used:

^

Touch the s sensor to switch the fan

on.

^

Touch and hold the l sensor.

One or more of the "1" to "4" sensors will

flash.

The number of flashing sensors

indicates the percentage of the

operating time which has already been

used up.

Sensor "1" = 25 %

Sensors "1" and "2" = 50 %

Sensors "1" to "3" = 75 %

Sensors "1" to "4" = 100 %

The number of operating hours used

remains in the memory, even when the

appliance is switched off or there is a

power cut.

Operation

15

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

Comments to this Manuals

No comments