Miele W 211 Operations Instructions download pdf (Page 35)

Inserting the non-return flap

Air extraction:

If a non-return flap is not present in

the venting system, the non-return

flap supplied must be fitted into the

exhaust connection on the motor. The

flaps must open upwards.

^ The hood is designed for 6" (150 mm)

exhaust ducting. If 5" (125 mm)

exhaust ducting is used the reducing

collar must be fitted into the exhaust

connection on the motor (see "Air

extraction").

Recirculation mode:

The non-return flap is not required.

Attaching the motor assembly

First loosely screw the two locking

nuts onto the threaded bolts on

retaining plate A.

Leave a gap of

" (3 mm) for

hanging the motor on.

Fit the motor assembly onto the

hooks on retaining plate A and slide

down behind the nuts.

Tighten the nuts.

Installation

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 43 44

No comments

Miele W 211 Operations Instructions Page 35