Miele F 9052 i User Manual download pdf (Page 40)

All building-in instructions given are

for a right-hand hinged appliance.

If you have converted the appliance

to left-hand hinging, you will need to

adapt these instructions accordingly.

Building into a peninsular run

When built into a peninsular run, the

rear of the building-in niche must be

fitted with a kitchen furniture panel.

Aligning the housing unit

Before installing the appliance, the

housing unit must be carefully aligned

using a spirit level. The unit corners

must be at right angles, as otherwise

the furniture door will not align correctly

with the 4 corners of the appliance.

Preparing the appliance

^ Slide cover strip a into into the

holder as shown, and secure it with

screws b.

^ With 16 mm thick unit walls:

Shorten sealing strip c to the height

of the niche.

Stick the sealing strip to the side of

the appliance on which the door is

opened.

Clip spacer piece d over the hinges.

Building in the appliance

40

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 46 47 48

Comments to this Manuals

No comments