Miele OVEN H 4882 BP Operations Instructions download pdf (Page 5)

Technical safety

~

Before connecting the appliance to

the mains supply, make sure that the

voltage and frequency correspond to

the rating on the data plate, otherwise

the appliance could be damaged.

Consult a competent person if in doubt.

~

The electrical safety of this

appliance can only be guaranteed

when continuity is complete between it

and an effective earthing system which

complies with current local and national

safety regulations. It is most important

that this basic safety requirement is

present and regularly tested, and

where there is any doubt the household

wiring system should be inspected by a

qualified electrician.

The manufacturer cannot be held liable

for the consequences of an inadequate

earthing system (e.g. electric shock).

~

The appliance must be built in

before operation to ensure that no

electrical components are accessible.

~

Never open the casing of the

appliance.

Tampering with electrical connections

or components and mechanical parts is

highly dangerous to the user and can

cause operational faults.

~

Installation, maintenance and repair

work may only be carried out by a

suitably qualified and competent

person in accordance with national and

local safety regulations.

Repairs and other work by unqualified

persons could be dangerous. The

manufacturer cannot be held liable for

unauthorised work.

~

If the supply cord is damaged, it

must be replaced by a Miele approved

service technician in order avoid a

hazard.

~

During installation, maintenance and

repair work, the appliance must be

disconnected from the mains electricity

supply. The appliance is only

completely isolated from the electricity

supply when:

– the mains fuse is withdrawn,

– or the screw-out fuse is removed (in

countries where this is applicable),

– or it is switched off at the isolator.

Ensure that current is not supplied to

the appliance until after maintenance or

repair work has been carried out.

~

Do not connect the appliance to the

mains electricity supply by an extension

lead.

Extension leads do not guarantee the

required safety of the appliance (e.g.

danger of overheating).

~

This equipment may only be used in

mobile installations such as ships, if a

risk assessment of the installation has

been carried out by a suitably qualified

engineer.

Warning and Safety instructions

5

1 2 3 4 5 6 7 8 9 10 ... 71 72

Comments to this Manuals

No comments