Miele W 820 Operations Instructions download pdf (Page 6)

Before using for the first time

Important:

the appliance must be properly in-

stalled and connected to the water

and electricity supply according to

local and national regulations.

For further information read the instruc-

tions on pages 31 - 37

Check that the transit fitting at the

rear has been removed.

Before using for the first time prime

the ball valve as follows:

Switch on the machine.

Turn the selector switch to “Starch”.

Once the drum starts turning: set the

programme selector to “Drain”.

When the water has drained: turn the

programme selector to the “Fin-

ish/Start” position.

Switch the machine off.

The ball valve is operational.

Any residual lubricants and water

from testing still in the machine

should be flushed out as follows:

Do not load any laundry in the ma-

chine.

Add a little detergent to compart-

ment j.

Switch on the machine.

Turn the programme selector switch

to the “Cottons 60°C” programme.

Press the “Short” button.

The residues will have been flushed

out once the programme has fin-

ished.

Water hardness reminder.

The amount of detergent will depend

on various factors including the water

hardness level in your area. Set the

water hardness dial located in the

detergent dispenser box as a reminder.

Turn the dial to the required setting.

Use the spatula supplied with the

machine. It is located at the rear of

the dispenser drawer facia (see

page 23).

If you do not know how hard the water

is in your catchment area, please con-

tact your local water authority.

Water hardness

Hardness

range

water mg/litre Clake’s

scale

°dH

(German)

1 soft up to 135 up to 10° 0-7°

2 medium up to 250 10°-20° 7°-14°

3 hard up to 380 20°-25° 14°-21°

4 very hard over 380 over 25° over 21°

6

1 2 3 4 5 6 7 8 9 10 11 ... 39 40

Comments to this Manuals

No comments