Miele W 820 Operations Instructions Page 7

  • Download
  • Add to my manuals
  • Print
  • Page
    / 40
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 6
Warning and Safety Instructions
This appliance is designed and in-
tended only for normal household use
in the U.K. It should never be operated
by children. Supervise its use by the el-
derly or infirm.
Read the operating instructions through
before using this machine for the first
time, as this is for your safety and the
protection of the machine. They give
notes on the safety, the use and the
maintenance of the machine.
Further warning and safety instructions
are given in the text as appropriate.
...before using for the first time
Do not install your washing ma-
chine in rooms where sub-zero
temperatures may occur. Frozen hoses
may burst under pressure.
The reliability of the electronic control
system may be impaired at tempera-
tures below freezing point.
Before using the machine for the
first time, check that the transit fit-
ting at the rear of the machine has
been removed (see page 31).
During spinning, a transit fitting which
is still in position may result in damage
to both the machine and adjacent furni-
ture or appliances.
If the drain hose is attached to a
wash basin or sink, make sure it is
secure, (see illustration in the sec-
tion“Guide to the machine”),
so that the force of the water flowing
out of the hose does not dislodge it, as
this will otherwise result in flooding.
If hooking the hose into a wash basin,
check that the water can drain off
quickly enough to prevent the sink from
overflowing.
Keep these operating instructions
in a safe place.
...when using your machine
Only wash items which are de-
clared by the manufacturer to be
machine-washable on the care label
(textile care G.B. laundry care, AUS),
(see Care labels on page 10).
Descaling agents contain acid.
Only use proprietary non-corrosive
descaling agents and strictly observe
the manufacturer’s instructions. After
descaling, always run several full rinse
cycles to remove any acid residue and
to protect component parts from corro-
sion.
Never use detergents containing
solvents in this machine, as this
may result in damage to component
parts and create toxic fumes. Such
detergents also pose a fire and explo-
sion hazard.
Textiles which have been pre-
treated in detergents containing
solvents must be thoroughly rinsed in
clean water before being washed in
this machine.
Do not use dye removers as these
contain sulphur compounds which
may damage washing machines.
7
Page view 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 39 40

Comments to this Manuals

No comments