Miele G880 Operations Instructions download pdf (Page 42)

White residue is visible on cutlery and

dishware

– No salt in the salt reservoir.

Fill the salt reservoir with salt as out-

lined in the “Water Softener” section.

– The salt reservoir cap has not been

screwed on properly.

– Not enough rinse aid is being dis-

pensed.

Use a higher dosage setting - see

“Adding rinse aid".

Water remains in the dishwasher at

the end of a program

– The drain hose is kinked or clogged.

– The drain pump or non-return valve

may be blocked – see “Cleaning and

care”.

Before attempting a repair:

Turn the program and temperature

selector knob to the STOP position.

Turn off the dishwasher using the

ON/OFF switch.

The “Intake/Drain” indicator lights

during the “ENERGY SAVER” pro-

gram.

The “ENERGY SAVER” program re-

quires a water supply temperature of at

least 45 °C/115 °F. If the incoming

water is less than this temperature, the

“IntakeDrain” lamp illuminates (see also

“Program selection”). If your hot water

system has been used recently, not

enough hot water may have been avail-

able to adequately clean the dishes.

If necessary, repeat the program.

If the “Intake/Drain” lamp lights

again, select a different program.

The “Softener”, “Rinse”, “Drying”

and “End” sequence indicator lamps

blink simultaneously.

Turn the program and temperature

selector knob to the STOP position.

Turn off the dishwasher using the

ON/OFF switch.

After 5 seconds:

Turn on the machine.

Re-select the program.

If the lamps blink again there is ma-

chine fault. Please call the MIELE Ser-

vice Department.

Under certain circumstances you may

still be able to use the “RINSE &

HOLD” and “ENERGY SAVER” pro-

grams.

Problem solving guide

42

1 ... 41 42 43 ... 68

Comments to this Manuals

No comments