Miele G880 Operations Instructions download pdf (Page 50)

3. Installing the control panel.

The control panel and hardware is packaged separately from the dishwasher. It

should be installed using the following procedure.

If a GDU decor kit is being used, (to

convert an “i” dishwasher to a “U” ver-

sion), the spacer bars

i must first be

removed and stored for possible use

in the future, (See the separate in-

structions for installing the GDU

decor kit). If the GDU kit is

not being

used, skip the following step.

To remove the spacer bars from the

control panel, place the panel on a

table, printed side up, and gently

push down on the spacer bars at a

point near the bottom of the control

panel. This will release the mounting

bolts from their slots.

Install the neccessary spacer bars i

on the control panel.

Place the covers b over the push-

button switches.

Install the adapter disc c.

Place the seal d onto the ventilation

grill.

Push the ventilation grill e into the

metal backing plate.

Position the control panel f over the

backing plate and fasten it from the

inside of the door

g using the six

screws provided.

Align and press the program knob

onto its shaft

Dishwasher installation

1 ... 49 50 51 ... 68

No comments

Miele G880 Operations Instructions Page 50