Miele PG 8172 Operations Instructions download pdf (Page 19)

Malfunctions

Pictogram Meaning Possible cause Remedy

Lower spray arm is

blocked

Spray arm is not correctly

engaged

Correctly engage the spray arm.

Spray arm obstructed by, e.g. a

piece of cutlery

Remove the obstruction.

Spray arm blocked by soiling

Clean the spray arm bearings

( 8.2).

Upper spray arm is

blocked

Spray arm obstructed by, e.g. high

dishes

Remove the obstruction.

Spray arm blocked by soiling

Clean the spray arm bearings

( 8.2).

Filter cylinder

blocked

Heavily contaminated filter cylinder

Remove, clean and replace the

filter cylinder.

Energy optimization

On-site energy optimisation

equipment switches individual

electrical consumers (heating

elements).

Wait until the on-site energy

optimisation equipment switches

off.

Pump inlet filter not

fitted

Missing pump inlet filter

 The machine switches off

after 30 seconds and will not

be filled.

Fit the pump inlet filter and, if

necessary, switch the machine on

again.

INFO: When the prompt is

downgraded three times, the

machine can be switched on.

Pump inlet filter not

fitted despite three

prompts

Missing pump inlet filter

IMPORTANT: The circulating

pump and drain pump may get

damaged by drawing in, for

example, pieces of cutlery.

Fit pump inlet filter.

Automatic hood

opening

defective.

Defective motor

Contact an authorised service

technician for the repair.

Tank will be filled

A wash programme is started

while the machine is refilling

Wait till the machine has been

filled.

Malfunction with

error code

Various

Display the error code ( 9.1) and

assign the repair to an authorised

service technician.

is displayed only when the machine is connected to an equipment with energy optimisation

Special equipment

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 41 42

Comments to this Manuals

No comments

Miele PG 8172 Operations Instructions Page 19

Comments to this Manuals

Related products and manuals for Dishwashers Miele PG 8172