Miele PG 8172 Operations Instructions download pdf (Page 36)

Electrical connection

17.1 Connecting the mains cable

Requirements for the mains cable

 Cable type: Type H07 RN-F or equivalent

 The wires must be fitted with wire end ferrules.

 Cross section and number of cores: suitable for on-site power and protection

for more information see the sticker in the front panel

Connect the mains

cable to the rear of the

machine.

Withdraw the mains

cable at the front and

route it to the left.

Follow the connection

diagram ( 17.3).

Connect the wires of the

mains cable according

to the connection

diagram.

Close the quick release

connectors.

If necessary plug bridges.

Firmly press the bridges

with a screwdriver.

Connect the green-yellow

wire to the distributor of

the earth wires.

Attach the mains cable to

the mounting plate with a

cable tie for strain relief.

17.2 Establishing an earth connection

 Connect the machine into the on-site equipotential bonding system.

INFO The terminal screw is located behind the right rear leg of the machine. It is identified with the

symbol.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 42

No comments

Miele PG 8172 Operations Instructions Page 36