Miele PT 7135 C Service Manual download pdf (Page 17)

Estimated time remaining

When a programme is selected the

estimated drying time will appear in the

display. Please be aware that it is only

an estimate!

The following factors all affect the

estimated time remaining: residual

moisture content after spinning; type of

fabric; size of load; room temperature;

fluctuations in power supply.

The electronics continually assess

conditions in the machine and adjust

the estimated time remaining for a more

accurate reading. Because of this the

time displayed can alter during the

course of a programme.

In the same way, the

Woollens

handcare

and

Smoothing

programmes

can finish earlier than expected if a

certain temperature is reached. This

can happen with particularly fine

fabrics or if items were partly dry

beforehand.

Before the end of a programme

There is a cooling down phase at the

end of the drying sequence:

Cooling

down

will appear in the display. The

programme will not finish until the

cooling down phase has been

completed.

There is no cooling down phase at the

end of the following programmes:

Woollens hand care, Smoothing.

At the end of a programme

Anti-crease action

(if selected) and

Finish

will appear in the display at the

end of the programme.

During the anti-crease phase (if

selected) the drum will turn at intervals

for an hour to help prevent creasing.

E Remove the laundry

^

Press the a button to open the door.

^

Remove the laundry.

Check that all items have been

removed from the drum. If items are

left in the dryer, they could be

damaged by overdrying when the

dryer is next used.

The drum lighting will come on when

the door is opened. It will go out a few

minutes later to save energy.

^ Close the door.

Maintenance after each drying

programme

^

Please see "Cleaning and care" for

details.

How to dry correctly

17

1 ... 16 17 18 ... 56

Comments to this Manuals

No comments