Installation InstructionsCS1421 S en - CA Installation, repair and maintenance work should be performed by a Miele authorized s
Installation dimensionsa Spring clipsb Appliance frontc Installation heightd Power supply box with connection cable,L=783/4" (2000 mm)e Browning
Cut out^ Make the worktop cut-out for one ormore appliances as applicable.Remember to maintain a minimumsafety distance from the back wall,as well as
Installation of multipleappliancesWhen installing more than one combiset appliance, a support bar b must beinstalled between the appliances.Countertop
Sample calculations for a countertop cut-out for three appliancesAappliance widthminus5/16"(8mm)Bappliance widthCappliance widthminus5/16"(8
a Spring clipsb Support barsc Space between support bar and countertopAn additional support bar is required for each additional appliance. The positio
Attach the spring clips andsupport barsWood or solid surface countertops^ Place the supplied spring clips aand the support bars b at themarked positio
^ Coat the edges of the spring clips a,^ and the space d between thestrips b and the countertop withsilicone (supplied).Installation27bda
Installing the appliance^ Feed the power cord down throughthe cut-out.^ Then place the front side of theappliance in the countertop cut-out.^ Then wit
SealingThe appliance must not be permanentlysealed into the countertop wheninstalled. The sealing strip under theedge of the appliance provides asuffi
,CAUTION: Before installation orservicing, disconnect the powersupply by either removing the fuse,shutting off the main power supplyor manually "
WARNING- When using yourappliance follow basicprecautions, including thefollowing:Read all instructions beforeinstallation or use to preventinjury and
Alteration rights reserved / 4608For the most updated manual see the Miele web site.M.-Nr. 07 472 000 / 00
Children~Always supervise any children in thevicinity of the appliance. Do not allowchildren to play with the unit.~Children should use the grill only
Technical safety~Only skilled persons duly authorizedby the manufacturer may install thisappliance or perform maintenance andrepair work on it. Work p
~Repair of the appliance during thewarranty period should be performedonly by Customer Service personnelwho are duly authorized by themanufacturer; ot
~Do not set up or operate theappliance in the open air.~Do not use the ledge for storage. Ifthe appliance is accidentally switchedon or there is resid
Note to the installer:Please leave this instruction bookwith the consumer for the localelectrical inspector’s use.The minimum distances given inthese
Safety distances above theapplianceThe minimum distance between theappliance and an installed exhausthood must be at least 259/16"(650 mm). Howev
Safety distances to the sidesof the applianceThe appliance should only be installedas shown in the illustrations, whilemaintaining the required safety
Comments to this Manuals