Miele K 1901 Vi Operations Instructions download pdf (Page 57)

Anti-tipping mechanism

The anti-tipping mechanism a

ensures the housing unit b is securely

fixed to the wall and tipping of the

appliance is prevented.

Danger of tipping

The housing unit must be fixed to

the wall behind with several screws.

Only this can ensure that the

appliance will not tip over after

being installed.

Use two anti-tipping mechanisms for

each appliance or four for each

side-by-side combination of

appliances.

Position the anti-tipping mechanisms

a at the rear of the housing unit on

the left and right, leaving a gap to the

wall of no more than 10 mm.

While holding the anti-tipping

mechanisms in place, mark the

necessary drill holes at the top and

rear of the housing unit.

^ Put the anti-tipping mechanisms in a

safe place - they will be required

later.

Fixing screws for different uses and

types of material are supplied in the

accompanying pack.

If these are not suitable for the

anti-tipping mechanism in your

installation, you will need to secure it

by alternative means.

Secure the housing unit to the wall.

Installation

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 71 72

No comments

Miele K 1901 Vi Operations Instructions Page 57