Miele T 679 Ci Operations Instructions download pdf (Page 12)

How to dry correctly

Hints on saving energy

Make sure that your laundry has

been thoroughly spun at the highest

appropriate spin speed before

drying. Spinning at 1600 rpm, for

example, saves approximately 30%

energy and time compared with 800

rpm.

Load the full amount of laundry ac-

cording to the programme chosen

(see “Programme chart”) for the

most economical drying related to

the size of the load. Make sure that

the drum is not over- or under-

loaded.

As far as possible, sort fabrics for:

– the type of fibre or weave

– the degree of drying required

– similar size of items

– the moisture content after spinning.

This will help towards an even drying

result.

Ensure the room is well ventilated.

1Switching on and loading

Fasten duvet covers etc to prevent

small items from being rolled up in-

side them.

Do up zips and tie fabric belts and

apron strings.

Press the “l-On / 0-Off” button.

Press the “Door” button and open

the door.

Make sure there is no washing

detergent dispenser among the

laundry, as this could melt and dam-

age the machine and the laundry.

Load the laundry very loosely into

the drum.

Do not overload the drum. Over-

loading can cause unnecessary

wear and tear to the laundry and

give a disappointing drying result.

Shut the door with a light swing but

do not slam it. Do not push on the

door to shut it.

Important: Please check that items

of laundry cannot be trapped by the

door, as this will cause damage to

the fabric.

How to dry correctly

12

1 ... 11 12 13 ... 48

Comments to this Manuals

No comments