Miele T 679 Ci Operations Instructions download pdf (Page 42)

Electrical connection

Electrical connection U.K.

All electrical work should be carried out

only by a suitably competent person, in

strict accordance with national and

local safety regulations.

Theappliance is supplied with a mains

cable with moulded plug for connection

to a 230-240V mains supply. The voltage,

rated load and fuse rating are given on

the data plate. Please ensure these

match the household mains supply.

Connection should be made via a

fused plug and suitable switched

socket which is easily accessible after

installation. For extra safety it is advis-

able to install a residual current device

(RCD), with a trip current of 30 mA. Do

not connect via an extension lead.

Important

The wires in the mains lead are col-

oured in accordance with the following

code:

Green/yellow = earth

Blue = neutral

Brown = live

Where it is necessary to change plugs,

if the colours of the wires in the mains

lead of this appliance do not corre-

spond with the coloured markings ident-

ifying the terminals of your plug, pro-

ceed as follows:

The wire which is coloured green and

yellow must be connected to the termi-

nal in the plug which is marked with the

letter E or by the earth symbol z or col-

oured green, or green and yellow.

The wire which is coloured blue must

be connected to the terminal in the

plug which is marked with the letter N

or coloured black.

The wire which is coloured brown must

be connected to the terminal in the

plug which is marked with the letter L

or coloured red.

WARNING: THIS APPLIANCE

MUST BE EARTHED

Ensure power is not restored to the ap-

pliance while installation work is being

carried out.

Non-rewireable plugs BS 1363

If this machine is fitted with a non-re-

wireable plug, the following information

applies:

If the socket outlets are not suitable for

the plug supplied with the product, it

must be cut off and an appropriate

plug fitted.

The plug cut from the flexible cord should

be disposed of and on no account be in-

serted into any socket elsewhere in the

house (electric shock hazard).

The fuse cover must be refitted when

changing the fuse, and if the fuse cover is

lost, the plug must not be used until a suit-

able replacement is obtained. The colour

of the correct replacement cover is that of

the coloured insert in the base of the plug,

or the colour that is embossed in words on

the base of the plug (as applicable to the

design of plug fitted).

Replacement fuses should be ASTA ap-

proved to BS 1362 and have the cor-

rect rating. Replacement fuse covers

may be purchased from your local elec-

trical supplier or Service agent.

Electrical connection

42

1 ... 41 42 43 44 45 46 47 48

Comments to this Manuals

No comments