Miele T8423C Datasheet download pdf (Page 38)

External condensed water

outlet

General notes

When drying is in progress, condensed

water is pumped into the condensed

water container through the drain hose at

the back of the dryer. The condensed

water can also be drained off directly if

the machine is installed near a sink, drain

outlet etc. so that the condensed water

container does not have to be emptied.

Drain hose length ............1.50 m

Maximum delivery head .......1.50 m

Maximum drain hose length ....4.00 m

,

If the on-site water drainage

system is not fitted with a non-return

valve or an appropriate air gap, one

must be fitted to prevent the risk of

back-flow. (See "Installation conditions

requiring a non-return valve").

The following optional accessories are

available:

–

an extension hose

–

a non-return valve kit for connection

to an external condensed water

outlet (includes an extension hose).

Maximum delivery head with

non-return valve fitted: 1.00 m

Arranging the drain hose

,

Do not pull on the drain hose and

do not stretch it or allow it to become

kinked as it could get damaged.

^

There will be a small amount of

residual water in the drain hose.

Have a container ready to collect this.

^

Pull the hose off its connection (see

arrow).

^ Allow any residual water to run into

the container.

^ Unwind the hose and pull it carefully

out of the holders.

^

Position the hose to the right or left

hand side as necessary.

Leave the hose in the middle holder to

prevent it from becoming kinked

inadvertently.

Installation

38

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 51 52

Comments to this Manuals

No comments