Miele PW 6055 Plus Service Manual download pdf (Page 20)

E Start the programme

The Start button will flash as soon as a

programme can be started.

^

Press the Start button.

The Start button will now light up

constantly.

The estimated programme duration will

appear in the display. This will count

down in one minute steps. During the

first 10 minutes the machine measures

how much water is being absorbed by

the laundry. The programme duration

may be shorter depending on this

absorbency rate.

The programme sequence is also

shown in the display. The machine lets

you know which section of the

programme has been reached.

Once washing is in progress, you can

press the following short cut buttons:

– Button

D Extras to select or

de-select extras.

–

Button

E Timer to call up the

current time of day and the estimated

end time of the programme.

–

Button

G Cancel to cancel the

current programme. The suds are

pumped away immediately.

F Unload the drum

If laundry is not removed as soon as the

programme has finished, the

anti-crease phase will begin and the

drum will turn at intervals to help

prevent creasing.

Anti-crease will flash alternately with

Finish in the display.

The machine will switch off

automatically 15 minutes after the

end of the anti-crease phase. You will

need to press the K button to switch

it back on again.

^

Press the a button to open the

drum door.

^

Remove the laundry.

Check that all items have been

removed from the drum. Items left in

the drum could discolour other items

in the next wash or become

discoloured themselves.

^

Check the folds in the door seal for

any small articles, e.g. buttons, which

might be lodged there.

^

Close the drum door. Otherwise there

is the danger of objects being placed

inadvertently in the drum. If these

remained unnoticed and were

washed in the next load, they could

damage the laundry.

^

Switch the machine off with the K

button.

Short instructions

20

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 59 60

Comments to this Manuals

No comments