Miele PW 6055 Plus Service Manual download pdf (Page 51)

Secure the transit bars to the back of

the machine. Make sure that holes b

are fitted over retainers a.

The machine must not be moved

without the transit bars in place.

Store them as shown or keep them

in a safe place for future use. They

must be re-fitted if the machine is to

be moved again (e.g. when moving

house).

Re-fitting the transit bars

Re-fitting is carried out by reversing the

procedure.

Levelling the machine

The machine must stand perfectly level

on all four feet to ensure safe and

proper operation.

Incorrect installation may increase

electricity and water consumption and

may cause the machine to move about.

Screwing out and adjusting the feet

The four adjustable screw feet are used

to level the machine. All four feet are

screwed in when the machine is

delivered.

Using the spanner supplied, turn

counter nut 2 in a clockwise

direction. Then turn counter nut 2

together with foot 1 to unscrew.

Installation and connection

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 59 60

No comments

Miele PW 6055 Plus Service Manual Page 51