Miele W 833 Operations Instructions download pdf (Page 39)

Connection to the drainage system

The machine drains via a drain pump

with a delivery head of 1 metre.

The drain hose is 1.5 m long. It must

not be kinked as this restricts drainage.

The swivel elbow at the end of the hose

can be turned in either direction, or can

be detached if required with a sharp

twist and pull.

Drain hose connection:

Direct into a sink: Hook the hose

over the edge and secure. Make

sure that the water can flow freely to

avoid flooding and to prevent water

from being sucked back into the ma-

chine.

Connected to a standpipe.

Connected to a plastic drain pipe

with a rubber nipple. There is no

need to use a non-return valve.

Allow the water to drain off into a

floor drain.

If required, the hose can be extended

to a length of 5 m. The necessary parts

can be purchased from the Miele

Spare Parts department.

For a delivery head of more than 1 m

(up to a maximum of 1.8 m) a second

Duo drain pump is available with the

corresponding conversion kit from the

Miele Spare Parts Department.

Plumbing

39

1 ... 38 39 40 ... 48

Comments to this Manuals

No comments