Miele W 833 Operations Instructions download pdf (Page 42)

Programmable functions - To programme

Programming and saving the

programmable functions

Programmable functions are activated

using a combination of the buttons for

the optional functions with the pro-

gramme selector switch. These combi-

nations can call up extra functions not

displayed on the control panel.

Programming takes place in three

steps:

– select programming mode

– activate programmable function

– store programmable function in

memory

1. Select programming mode

1 The machine must be switched off

and the door closed. All pushbutton

switches must be released and pro-

gramme selector pointing to “Finish /

Start”.

2 Press in the “Soak” and “Short wash”

buttons.

3 Press in the “I-ON / O-OFF” button.

4 Release the “SOAK” button.

5 Release the “Short wash” button.

The “ON” light now comes on in the se-

quence display and the “Main wash”

light flashes.

2. Activate programmable function

6 For the function required turn the pro-

gramme selector to the appropriate

setting as follows:

–for

High Water Level

programmable function

A

turn to SEPARATE RINSE

–for

Extra rinse

programmable function

B

turn to Drain

–for

Programme lock

programmable function

C

turn to QUICKWASH 40°C

–for

Gentle action

programmable function

D

turn to DELICATES 50°C

7 Quickly press the “Short wash” but-

ton 4 times, (eg in and out twice).

The indicator light “Rinses/Rinse hold”

now lights up in the sequence display.

The programmable function is now acti-

vated.

8 If you wish to activate more than one

programmable function, repeat

steps 6 and 7. If not, then:

3. Save the programmable function

9 Press the I-ON /0-OFF button to re-

lease it.

The machine is now switched off and

the programmable function(s) stored in

memory.

Programmable functions - To programme

42

1 ... 41 42 43 44 45 46 47 48

Comments to this Manuals

No comments