Miele 36160111USA Installation Manual download pdf (Page 25)

To reduce the risk of electrical

shock, disconnect the appliance

from the power supply by shutting

off the power main, tripping the

circuit breaker or unplugging the

power cord before maintenance.

Never use cleaning agents

containing abrasive substances

such as sand, soda, acids, chlorides

or chemical solvents.

Non-abrasive cleaning agents are

also unsuitable, as they can cause

matte areas to appear.

Avoid getting water on the solid

wood facing or the shelves.

Stainless steel surfaces can be

cleaned using a non-abrasive

stainless steel cleaner (available

from Miele).

Do not use a steam cleaner to clean

this appliance. Pressurized steam

could penetrate electrical

components and cause a short

circuit.

Do not allow water to get into the

electronic unit or lights.

Before cleaning

^

Use the main switch to turn the

appliance off completely.

The main switch is located on the right

side underneath the control panel.

^

Unplug the power cord.

^

Remove any bottles from the

appliance and store it in a cool place.

^ Take out any removable parts,

e.g., shelves.

Cleaning the interior

^ It is recommended to clean the

interior once a month.

^ Use a mild solution of warm water

and liquid dish soap.

^ Clean the wooden racks with a damp

cloth. Do not allow the racks to

become too wet.

^

After washing, wipe down the interior

and accessories with a clean wet

cloth, then dry with a soft cloth. Leave

the appliance door open for a short

time, so the moisture can evaporate.

Appliance door

^

Stainless steel surfaces can be

cleaned using a non-abrasive

stainless steel cleaner.

^

To help prevent resoiling, a

conditioner for stainless steel can

also be used. Apply sparingly with

even pressure.

Cleaning and care

25

1 ... 24 25 26 ... 60

Comments to this Manuals

No comments