Miele 36160111USA Installation Manual download pdf (Page 48)

Sliding the appliance into the

installation niche

^ Unscrew the plinth.

^

To protect the corners of the

installation space, attach the

supplied edge protector a on both

sides with adhesive tape.

^

Plug the appliance into the power

outlet b.

The plug of the appliance should be

easily accessible after installation.

If the plug is not accessible after the

appliance has been installed,

disconnection from the power

supply should be completed via the

circuit breaker.

In the case of side-by-side

installations, a separate outlet must

be used for each appliance.

^

To prevent the power cord from

becoming caught:

Tie a piece of string to the middle of

the power cord and feed it forward

under the appliance. When sliding

the appliance in, pull the cable

forward c.

^ Carefully slide the appliance into the

space until the height-adjustable

wheels interlock with the anti-tip

brackets d.

If resistance is felt when attempting to

slide the appliance into the installation

niche - for example, because the floor

is uneven,

^

Turn the rear adjustable wheels

slightly outward (see "Aligning the

appliance"), then push the appliance

in.

Be careful not to damage the power

cord attached to the floor.

^

Remove the edge protector a.

Installation

48

1 ... 47 48 49 ... 60

Comments to this Manuals

No comments