Miele G 2874 SCVi Operations Instructions download pdf (Page 20)

Do not fill the reservoir with water.

^ Add salt only until the reservoir is full

or until water runs out of the opening.

The salt reservoir holds approx. 1 kg

of salt.

Do not add any more than 1 kg of

salt.

As the salt reservoir is filled, displaced

water may overflow.

^

Clean any excess salt from around

the reservoir opening and then close

the flap.

^

Run the Quick wash programme im

-

mediately (without any crockery in

the dishwasher, and without selecting

the Turbo extra option) to remove any

traces of salt from the cabinet.

Insufficient salt indication

^

Fill the salt reservoir with dishwasher

salt for reactivation when the

Insufficient salt message appears.

(If it appears during a programme,

wait until the end of the programme).

^

Confirm with

OK.

The "Replenish salt" message will go

out.

After the salt reservoir has been filled,

the "Insufficient salt" message may still

appear in the display if the salt

concentration has not yet reached the

correct level.

If this is the case, confirm again with

OK.

The salt indicator is deactivated when

the dishwasher registers a water

hardness level below 0.7 mmol/l (4 °d).

,

Run the Quick wash programme

immediately (without any crockery in

the dishwasher, and without

selecting the Turbo extra option) to

remove any traces of salt from the

cabinet.

Before using for the first time

20

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 87 88

Comments to this Manuals

No comments