Miele G 2874 SCVi Operations Instructions download pdf (Page 9)

Technical safety

~

Before setting up the appliance,

check it for any externally visible

damage. Under no circumstances

should you use a damaged appliance.

A damaged appliance could be

dangerous.

~

The dishwasher must only be

plugged into the electricity supply via a

suitable switched socket. The electrical

socket must be easily accessible after

the dishwasher has been installed so

that it can be disconnected from the

electricity supply at any time. (See

"Electrical connection").

~

There must be no electrical sockets

behind the dishwasher. Danger of

overheating and fire risk if the

dishwasher were to be pushed up

against a plug.

~

The dishwasher must not be

installed under a cooktop. The high

radiant temperatures which are

sometimes generated by a cooktop

could damage the dishwasher. For the

same reason it should not be installed

next to open fires or other appliances

which give off heat, such as heaters

etc.

~

Do not connect the dishwasher to

the mains supply until it has been fully

installed.

~

Before connecting the appliance,

check that the connection data on the

data plate (voltage and connected

load) match the mains electricity

supply. If in any doubt, consult a

qualified electrician.

~

The electrical safety of this

appliance can only be guaranteed

when continuity is complete between it

and an effective earthing system. It is

most important that this basic safety

requirement is present and regularly

tested and where there is any doubt the

electrical system in the house should

be checked by a qualified electrician.

The manufacturer cannot be held liable

for the consequences of an inadequate

earthing system (e.g. electric shock).

~

Do not connect the appliance to the

mains electricity supply by a

multi-socket unit or an extension lead.

These do not guarantee the required

safety of the appliance (e.g. danger of

overheating).

Warning and Safety instructions

9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 87 88

Comments to this Manuals

No comments