Miele KFN 14943 SD ED User Manual download pdf (Page 26)

DynamicCooling

When the DynamicCooling function is

not switched on, the natural circulation

of air in the appliance will cause

different temperature zones in the

refrigerator as the cold, heavy air will

sink to the lowest section of the

appliance. You should bear this in mind

when placing food in the appliance

(see "Using the refrigerator efficiently").

However, if you are placing a large

amount of food in the refrigerator at any

one time, it is a good idea to switch on

DynamicCooling. This way you can

distribute the temperature inside the

appliance to all areas more evenly so

that all the food will be chilled to about

the same degree.

The temperature is set as normal with

the temperature control.

DynamicCooling should also be

selected when:

– the ambient temperature in the room

is high (above approx. 33 °C), and

–

the room humidity level is high.

Switching on DynamicCooling

^

Select the refrigerator section.

The "Refrigerator" symbol will light up

yellow.

^

Touch the DynamicCooling sensor so

that it is highlighted in yellow.

Switching off DynamicCooling

Because energy consumption with

DynamicCooling activated is higher, it

should be switched off under normal

conditions.

^ Select the refrigerator section.

The "Refrigerator" symbol will light up

yellow.

^

Touch the DynamicCooling sensor so

that it is highlighted in yellow.

The fan for DynamicCooling

switches off whilst the door is open.

Using SuperCool, SuperFreeze and DynamicCooling

26

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 67 68

Comments to this Manuals

No comments