Miele F 9052 i User Manual Page 16
- Page / 48
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
If you have adjusted the temperature,
wait for approx. 6 hours if the
appliance is not very full and for
approx. 24 hours if the appliance is
full before checking the temperature
display as it will take this long for the
display to give an accurate reading. If,
after this time, the temperature is still too
high or too low, you will need to adjust it
again.
Temperature range
The temperature can be adjusted from:
-14 °C to -28 °C
The ambient temperature in the room
and the installation location can affect
the time it takes for the appliance to
reach the lowest temperature. If the
ambient temperature is too high, the
appliance may not reach the lowest
temperature.
Temperature display
During normal operation, the
temperature display on the control
panel shows the temperature in the
warmest part of the appliance.
If the temperature is not within the
range that the appliance is able to
display (below 0 °C), bars will flash in
the temperature display.
The temperature display will flash if
–
a different temperature is being set,
–
the temperature in the appliance has
risen by several degrees, indicating
that the appliance is warming up too
much.
This loss of coldness is no cause for
concern in the following circumstances:
–
when the door has been left open for
a while, e.g. for removing or storing a
large amount of food,
–
when fresh food is being frozen.
However, if the temperature in the
freezer section remains above -18 °C
for a long time, check that the frozen
food has not started to defrost. If it has
started thawing, check that the food is
safe to use and if it is, use it as quickly
as possible.
Temperature display brightness
The appliance is supplied with the
brightness of the temperature display
set as low as possible. However, if the
door is opened, a setting changed or if
the alarm is sounding, the temperature
display will appear much brighter for
approx. 1 minute.
The level of brightness can be
adjusted:
^
Press and hold the Super freeze
button for approx. 5 seconds.
The Super freeze indicator light flashes
and a
; flashes in the temperature
display.
The correct temperature
16
- F 9052 i 1
- F 9252 i 1
- Contents 2
- Guide to the appliance 4
- Caring for the environment 5
- Correct application 6
- Safety with children 6
- Technical safety 7
- Correct use 8
- Disposal of your old freezer 10
- How to save energy 11
- ; flashes in the temperature 13
- Switching on and off 13
- The correct temperature 15
- Activating the alarm system 18
- Switching the alarm off early 18
- Temperature alarm 18
- Door alarm 18
- Super freeze 19
- Freezing and storing food 20
- Defrosting the appliance 25
- Cleaning and care 27
- Problem solving guide . . ? 28
- After sales service 32
- Electrical connection 33
- Installation 34
- Building-in dimensions 36
- Changing the door hinging 37
- Building in the appliance 40
- Adjusting the door hinges 45
- M.-Nr. 07 021370 / 00 48
Related products and manuals for Fridge-freezers Miele F 9052 i
Fridge-freezers Miele F 456 i-2 User Manual
(48 pages)
(48 pages)
Fridge-freezers Miele KD 1450 S User Manual
(40 pages)
(40 pages)
Fridge-freezers Miele K 9122 Ui User Manual
(56 pages)
(56 pages)
Fridge-freezers Miele KT 12510 S User Manual
(44 pages)
(44 pages)
Fridge-freezers Miele K 9758 iDF User Manual
(60 pages)
(60 pages)
Brennenstuhl 24 hour Timer MZ 44 IP44 manuali
Manuali dei proprietari e guide per l'utente per Accessori per gli impianti elettrici Brennenstuhl 24 hour Timer MZ 44 IP44.
We fornisce 1 manuali pdf Brennenstuhl 24 hour Timer MZ 44 IP44 per scaricare gratuitamente in base al tipo di documento: Manuale Utente
Comments to this Manuals