Miele CS 1012-1 Installation Manual download pdf (Page 41)

When installing two or more appliances next to each other a spacer bar b must

be used between each one.

See "Fixing the spring clamps and spacer bars".

Worktop cut-out

- two appliances

Worktop cut-out

- three appliances

To calculate the cut-out width (D) required:

Add up the widths of each appliance (e.g. 288 mm, 380 mm) and subtract 16 mm

from this figure

Number of

appliances

Appliance width in mm Worktop cut-out in mm

1 288 288 - 16 = 272

2 288, 288 288 + 288 - 16 = 560

2 288, 380 288 + 380 - 16 = 652

3 288, 288, 288 288 + 288 + 288 - 16 = 848

3 288, 288, 380 288 + 288 + 380 - 16 = 940

Installation of several appliances

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 55 56

No comments

Miele CS 1012-1 Installation Manual Page 41