Miele H 277 B User Manual download pdf (Page 12)

Before using for the first time

Timer

After the appliance has been turned on,

Either;

– "12:00" and the "f" (Start) and

")" (End) symbols will flash in the

display.

or

– the timer will remain dark.

To save energy the time display has

been turned off (factory setting)

If the "f" and ")" buttons are

pressed simultaneously, "12.00"

should appear in the display.

Setting the time of day

Press the "f" (Start) and ")" (End)

buttons simultaneously.

"12:00" and the control lamp in the cen-

ter of the “– /+” button will now stay on

without flashing.

Use the “– /+” button to enter the

time in hours and minutes.

When the control lamp for the “– /+” but-

ton goes out, the time has been set.

The colon will flash and the display will

change in one minute intervals.

To turn off the time display while still

allowing the clock to run unseen,

see page 24.

Oven

Use a cloth to wipe out the oven inte-

rior with warm water and a non-ab-

rasive detergent solution. Dry it with

a soft cloth.

Do not close the oven door until the

oven interior is dry.

Rinse the accessories.

New ovens may have a slight odor dur-

ing their first use. Running the oven for

at least an hour at 450°F / 230°C or

higher will make it dissipate more

quickly.

Turn the Oven Mode Selector to

"Convection".

Select the highest temperature using

the "– /+" button.

The timer can be used to set the finish

time to one hour.

Make sure the room is well venti-

lated during this process.

12

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 59 60

Comments to this Manuals

No comments