Miele K 1901 Vi Operations Instructions download pdf (Page 17)

Before using for the first time

^

Clean the inside of the appliance and

the accessories with lukewarm water

and a little washing-up liquid, and

then dry with a soft cloth.

Important: To ensure the correct

functioning of the appliance, and

especially if it has been transported

horizontally, let it stand for 8 hours

after transporting it to its final

location before connecting it to the

mains.

Switching the appliance on

^ Open the appliance door.

^ Press the rocker switch.

This switch is located on the right-hand

side underneath the control panel.

This switches all of the zones in the

appliance on or off together.

The appliance will start to cool, and the

interior lighting will come on when the

door is opened.

The access sensor in the control panel

will also light up.

To enable the temperature to get

sufficiently cold inside the

appliance, allow the appliance to

run for a few hours before placing

food in it.

Please note: switching off with the

rocker switch does not disconnect

the appliance from the mains.

Operation

A light touch of the finger on the

sensors is all that is required to operate

this appliance.

Please note:

–Aselectable sensor is always

highlighted in white.

–Aselected sensor is always

highlighted in yellow.

^

Touch the access sensor so that it is

highlighted in yellow.

The sensors for the three zones in the

appliance will now appear in the control

panel: refrigerator zone, upper

MasterFresh drawer and lower

MasterFresh drawer.

Switching on and off

17

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 71 72

Comments to this Manuals

No comments