Miele OVEN H 4882 BP Operations Instructions download pdf (Page 73)

,

CAUTION: Before servicing,

disconnect the power supply by

either removing the fuse, shutting off

the power main or manually

"tripping" the circuit breaker.

Installation work and repairs should

only be performed by a qualified

technician in accordance with all

applicable codes and standards.

Repairs and service by unqualified

persons could be dangerous and

the manufacturer will not be held

responsible.

Before connecting the appliance to

the power supply, make sure that

the voltage and frequency listed on

the data plate correspond with the

household electrical supply. This

data must correspond to prevent

machine damage. Consult an

electrician if in doubt.

Only operate the appliance after it

has been installed into cabinetry.

Installer:

Please leave these instructions with

the consumer.

Power supply

The oven is equipped witha6ft.

(1.8 m) flexible power cord consisting

of 4 wires ready for connection to a

dedicated 3 pole, 4 wire grounded

power supply:

120/240 V, 60 Hz, 30 A fuse rating

or

120/208 V, 60 Hz, 30 A fuse rating

Black wire: connect to L1 (hot)

Red wire: connect to L2 (hot)

White wire: connect to N (neutral)

Green wire: connect to GND (ground)

A dedicated line and junction box

should be used to connect the oven to

a 30 A circuit.

Connection details are also given on the

diagram located on the top of the oven.

Data plate

The silver data plate is located along

the front side of the oven with the door

open.

Electrical connection

73

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 79 80

Comments to this Manuals

No comments