Miele PW 5065 Service Manual download pdf (Page 35)

A Set the programmable function main wash water and/or rinse water to the

option Alternative water supply.

A Fit and secure the alternative water supply hose to the alternative water valve

(Y6).

4.2 Dispenser unit connection

Note

With the PW 5065 one dispenser pump with a connection hose with inner

diameter, D

= 6 mm and outer diameter, D

= 9 mm can be connected.

With the PW 6055 and PW 6065 up to 4 dispenser pumps with hoses with

= 4 mm / D

= 6 mm can be connected. For particularly viscous agents, one

of the 4 pumps can be connected with a hose with D

= 6 mm / D

= 9 mm.

Warning!

Only the holes required for a specific application should be made in the machine

casing and detergent dispenser.

A Remove the detergent dispenser.

A Remove the detergent dispenser top part.

Fig. 3

A With the PW 5065 and with viscous liquid agent, remove the stub on the

detergent dispenser and drill a 19 mm dia. hole in the position.

A With the PW 6055 and PW 6065, if the single connection for viscous liquid

agent is not sufficient, drill out the large marked opening, diameter

28.5 - 30 mm, on the detergent dispenser.

A Secure the hose through-feed/s on the detergent dispenser.

Warning!

The hoses must not contact or otherwise interfere with the concertina hose

which could otherwise be damaged.

A Lay the hose/s to the detergent dispenser and close any unused holes on the

hose through-feed with stoppers. Tighten the hose through-feed nut/s.

Descriptive Technical Documentation

DTD no. 511-6055 040-7

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 95 96

No comments

Miele PW 5065 Service Manual Page 35