Miele G 8066 Operations Instructions download pdf (Page 45)

E-Cloth

^

A microfibre "E-Cloth" is available

from the Miele UK Spare Parts

Department, which is suitable for

cleaning surfaces such as stainless

steel, glass, plastic and chrome

without the use of chemicals.

Cleaning the control panel

^

This should only be cleaned with a

damp cloth or a suitable cleaner for

use on plastic materials, or with a

disinfectant tested and recognised

as suitable for this use.

,

Do not use abrasive cleaners,

glass cleaners or all-purpose

cleaners.

Because of their chemical

composition they could cause

serious damage to plastic

components.

Cleaning the front of the

machine

^

Clean using a proprietary cleaning

agent designed for the type of front

the machine is fitted with.

,

Do not use cleaning agents

containing ammonia or thinners.

Cleaning the spray arms

Waste particles can lodge in the spray

arm jets.

It is therefore important to inspect the

spray arms regularly (at least every six

months).

^

Use a sharp pointed object to push

particles into the spray arm jets, and

rinse well under running water.

Remove the spray arms as follows:

^

Unscrew the upper spray arm.

^

First remove the bottom basket and

then pull the lower spray arm off.

Particles in the lower spray arm are

easier to rinse out if the caps are

opened first of all.

^ Open the caps in the direction of the

arrow. After cleaning screw them in

again securely.

Important:

After replacing the spray arms, check

that they rotate freely.

Cleaning and care

45

1 ... 44 45 46 ... 64

Comments to this Manuals

No comments