Miele G 8066 Operations Instructions download pdf (Page 52)

Cleaning the filters in the water

inlet

Filters are incorporated in the screw

connection of the water inlet hose to

protect the water inlet valve. If these

filters get dirty they need to be cleaned,

otherwise insufficient water flows into

the wash cabinet.

,

The plastic housing of the water

connection contains an electrical

component. It must not be dipped in

water.

To clean the filter

^ Disconnect the machine from the

mains supply (switch off at the mains

and pull out the plug, switch off the

appropriate circuit in the fuse box or

withdraw the mains fuse).

^ Turn off the stopcock and unscrew

the water inlet hose.

^

Clean the large area filter (1) and fine

filter (2), and replace with new filters

if necessary.

^ Replace filters and the seal. Make

sure they are sitting correctly.

^ Reconnect the hose to the water inlet,

making sure that it goes back on

straight.

^ Open the stopcock carefully.

If there is a leak, screw the

connections on more tightly.

Problem solving

52

1 ... 51 52 53 ... 64

Comments to this Manuals

No comments