Miele M 636 EG User Manual download pdf (Page 30)

Operation

Short step system

Touchpads 1, 2, and 3 allow you to

store in memory programmes which

you frequently use.

There are three memory stores where

frequently used programmes can be re-

corded.

You can store all the operating function-

s, e.g. grilling, combination functions,

and automatic programmes.

You can also store the command to

switch the turntable function on or off.

Each memory store can be used again

with a different programme.

Proceed as for setting the operating

mode.

Do not however press the START but-

ton at the end, instead select one of

the three programmes 1, 2, or 3 and

store the setting.

The code number of the stored pro-

gramme will appear in the display.

Finally press touchpad C to confirm

the setting.

The time of day appears in the dis-

play area.

Calling up the "Short step system"

Press the relevant storage touchpad,

1,2 or 3.

The stored settings for the operating

function appear in the display area.

The symbol for the function flashes

and the number of the programme

store appears.

Press the START button.

In the display area the codes for the

operating functions appear and the

time counts down in one second

steps. An audible tone sounds at the

end.

If you press the START button immedi-

ately after selecting the programme 1,

2, or 3, this will avoid the whole se-

quence showing in the display area.

Storing a new programme will auto-

matically delete any previously

stored programme.

In the event of a power cut the

stored programmes will be deleted,

and will need to be re-entered.

Make a note of the programme se-

quences, so that they are available

for use when you need them.

Operation

26

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 43 44

Comments to this Manuals

No comments