Miele M 636 EG User Manual download pdf (Page 41)

Installation and electrical connection

All electrical work should be carried out

by a competent person, in accordance

with national and local safety regula-

tions.

The microwave oven is supplied with a

mains cable and plug for connection to

a single phase 230-240 V, 50 Hz a. c.

supply. The voltage, rated load and

fuse rating are given on the data plate.

Please ensure that these match the

household mains supply.

If the cable is damaged it must be

replaced by a special cable which

must be fitted by a competent per-

son trained by the manufacturer.

Please consult the Customer Ser-

vice dept.

For extra safety it is advisable to install

a residual current device (RCD) with a

trip current of 30 mA.

GB / IRL

Connection should be made via a

fused connection unit or a fused plug

and a suitable switched socket, (rated

load under 3000 W), or via suitable iso-

lator (rated load over 3000 W), which is

easily accessible.

AUS / NZ

The plug rating is 10 A.

This appliance is elecrically sup-

pressed according to

AS / NZS 4052 : 1992

Important

The wires in the mains lead are col-

oured in accordance with the following

code:

Green/yellow = earth

Blue = neutral

Brown = live

As the colours of the wires in the mains

lead of this appliance may not corre-

spond with the coloured markings ident-

ifying the terminals in your plug, pro-

ceed as follows:

The wire which is coloured green and

yellow must be connected to the termi-

nal in the plug which is marked with the

letter E or by the earth symbol

z or

coloured green or green and yellow.

The wire which is coloured blue must

be connected to the terminal which is

marked with the letter N or coloured

black.

The wire which is coloured brown must

be connected to the terminal which is

marked with the letter L (GB / IRL) or

A (AUS / NZ) or coloured red.

WARNING

THIS APPLIANCE MUST

BE EARTHED

Installation and electrical connection

37

1 2 ... 36 37 38 39 40 41 42 43 44

Comments to this Manuals

No comments