Miele DG 6500 Operations Instructions download pdf (Page 88)

Repairs should only be carried out by an authorized technician in

accordance with local and national safety regulations. Unauthorized repairs

could cause injury or appliance damage.

Problem Possible cause and solution

The appliance cannot

be turned on.

The circuit breaker has tripped.

Reset the circuit breaker (see data plate for the

correct fuse rating).

There may be a technical fault.

Disconnect the appliance from the electric power

supply for approx. 1 minute.

Reconnect the power and turn the appliance on.

If it still does not heat, contact Miele Technical Service.

The demo program is

set and the device

does not heat.

^ Turn the demo program off. Follow the instructions on

the display.

The fan can still be

heard after the

appliance has been

turned off.

The appliance is equipped with a fan that directs

vapors from the oven interior to the outside. The fan will

continue to run for a while after the appliance has been

turned off. It will stop automatically.

You can hear a noise

(humming) when the

appliance is turned on,

when it is operating,

and after it has been

turned off.

This noise does not indicate a malfunction or a defect.

This noise occurs when the appliance pumps water.

After moving to a new

location, the appliance

no longer switches

from the preheating

phase to the cooking

phase.

The boiling point of water has changed because the

altitude at the new location differs by at least 984 ft. (300

meters) from the old.

To adjust the boiling point of water, descale the

appliance (see "Cleaning and care - Descaling").

Frequently asked questions

1 ... 87 88 89 ... 108

Comments to this Manuals

No comments

Miele DG 6500 Operations Instructions Page 88

Comments to this Manuals

Related products and manuals for Ovens Miele DG 6500