Miele TOUCHTRONIC T 8012 C User Manual download pdf (Page 25)

What if the "Filter/Vent" fault indicator is lit?

Possible fault Fix

The lint filter is clogged. Clean the lint filters. See "Dryer care".

The air supply in the room is

insufficient.

Open a window or door to increase

airflow.

What if the program runs too long or stops?

Possible fault Fix

The airflow is insufficient in the area of

the dryer.

Open a window or door to increase

airflow.

The lint filters are clogged. Clean the lint filters (see "Dryer care").

The laundry was not spun sufficiently in

the washer.

Select a higher spin speed in the wash

program.

The dryer is overloaded. Reduce the load size.

Metal zippers interfere with the dryer’s

moisture sensors.

Select a timed program to avoid over

drying.

The condenser is clogged with lint or

detergent residue.

Clean the condenser periodically (see

"Dryer care").

The air vent below the door is blocked. Remove any blockages.

What if the laundry is not dry enough?

Possible fault

The load contained too many dissimilar items (size and fabric.)

What if water has collected around the drum opening?

Possible fault

This is condensed moisture from the laundry.

Frequently asked questions

1 ... 24 25 26 ... 40

No comments

Miele TOUCHTRONIC T 8012 C User Manual Page 25