Miele TOUCHTRONIC T 8012 C User Manual download pdf (Page 36)

External water drain

When drying is in progress, condensed

water is pumped into the condensed

water container through the drain hose

at the back of the dryer. The

condensed water can also be drained

directly if the machine is installed near

a sink or a standpipe so that the

condensed water container does not

have to be emptied.

Drain hose length . . . . . . . 4' 11" (1.5 m)

Maximum delivery

head . . . . . . . . . . . . . . . . . 4' 11" (1.5 m)

Maximum drain length. . . . . . 13 ft (4 m)

If the hose is not long enough, an

extension hose is available as an

optional accessory from the Miele.

Installing the drain hose

Do not pull or kink the drain hose, it

may be damaged!

The drain hose holds a small amount

of remaining water. Keep a container

at hand.

Pull the drain hose off the holder.

^ Drain remaining water in the

container.

^ Unwind the hose from the holder and

carefully pull it from the clamps.

Guide the hose depending on the

installation to the left or right.

Leave the hose in the middle clamp

to prevent the drain hose from

becoming kinked.

Installation

1 ... 35 36 37 38 39 40

No comments

Miele TOUCHTRONIC T 8012 C User Manual Page 36